Commercial Steam Generators

Steam Home Page

Steam or Sauna?

About Steambathing

Tech Topics

Steam Showers and Suites

Personal Steam Cabinets

Prefab Steam Rooms

Steam Generators Residential

Steam Doors

Cedarbrook Sauna Pages

Visit Our Online Store

Email Us

Commercial steam generators are designed to withstand the demands of full time use in health clubs, hotels and spas. They also have additional maintenance, safety and convenience features.

In choosing a steam generator for your installation, pay close attention to the sizing and specification charts. Steam generators are selected based on the volume (in cubic feet) of the area to be used. Certain additional factors affect the correct sizing of the generator: construction materials such as glass or glass block, natural marble or other stones, piping longer than 25 feet from the steam generator to the steam room, or exterior walls and outside windows.
In any of the above conditions, add about 15% to the calculation of steam room size for each condition. When in doubt, choose the next size generator, or call for guidance.

Steamroom Requirements and Recommendations

1) The steam room must be completely enclosed with full walls, door, floor and ceiling.
2) A special steam door should be used for heat sealing and steam containmnet.
3) Anti-skid surfaces should be added to the floor if necessary.
4) A floor drain is required.
5) Walls and ceiling must be covered with water-resistant, non-corrosive materials, such as tile, molded acrylic or fiberglass.
6) The ceiling and the seats must be sloped to allow for condensate runoff.
7) The steam room is not to be operated above 120 degrees F (49 deg. C)
8) Locate the steam generator within 50 ft of the steam room.
9) Do not locate the steam generator inside the steam room, outdoors, in an unheated space (where it could freeze), near combustible or corrosive materials (high concentrations of chlorine in a pool equipment room is an example), or in areas accessible to the general public. 10) Install the steam generator on a level surface, providing sufficient space around it for servicing. 11)Provide protection agaianst contact with hot surfaces (steam line, safety valve and drain valve)

Mr. Steam Commercial Generators

Each Mr. Steam CU Commercial Steambath untit is fully wired, factory tested, ready for installation, and fully equippped with numerous standard features that enhance its quality and durability. One reason we like Mr. Steam's commercial generators is their serviceability. They can be opened for cleaning the tank and elements.

With each steamroom serviced by a Mr. Steam generator, specify an F1 Plus Control Package, which includes temperature and steam controls, and an F1 Plus sensor and AromaSteam steamhead.
MSCgendiag
MSCautoflush The Autoflush maintenance system option saves time and money, because Mr. Steam starts, stops and maintains itself on a prescheduled daily basis. The 24 hour, 7 day timeclock automatically brings your generator to operation daily and provides a pressurized blowdown at the end of the day. It can be programmed for up to 15 different on/off times during the week.
MSCF1
MSCF1sensor

Mr. Steam Commercial Specifications

MSCspec



Steamist Commercial Steam Generators

The Steamist HC system is totally automated and virtually maintenance free when purchased with the appropriate optional equipment. It is ideal for installation in central health facilities such as hotels, clubs, spas, gyms, and condominiums. The HC sysstem is delivered fully wired and assembled, and comes complete with automatic water feeder and low water cutoff.

The unit includes additional safety features such as pressure control and gauge, sight glass, check and drain valve. The CP-1 control package is included to closely regulate the temperature within the steamroom. An optional 24-hour 7-day programmable timer is available to schedule the on/off operation of the unit and the Automatic Bolow-Down Assembly, which increases the life expectancy of the boiler.

SMCdiag
Steamist Commercial Generator

SMC9-18 SMC24-72
Steamist commercial "HC" systems are available in sizes from 9 to 72 KW.

Steamist Commercial Specifications

SMCspec
Mill and Headquarters
5455 Mill Road / P.O.Box 535
Cashmere, WA 98815

(509)782-2447
FAX (509)782-3680
1-800-634-6334
saunasauna@cedarbrooksauna.com

West Coast Showroom
21326 State Route 9 SE
Woodinville, WA 98072

(425)481-3333
FAX (425)487-1695
1-800-426-3929
members.aol.com/steamrooms